Eagle Precision

Our Facilities

 

Eagle Precision Cast Parts - Office EntranceOur facility is over 65,000 square feet, and is located at 5112 Evanston Avenue in Muskegon, Michigan.

OFFICE HOURS:
7:30 AM – 4:30 PM  Monday – Thursday
7:30 AM – 4:00 PM  Friday

Tolerances and Capabilities

Click below to download our Investment Casting Quick Reference Guide. Inside, you’ll find:

  • Dimensional Tolerances
  • Capabilities
  • Design Recommendations
  • Materials Poured

New Call-to-action

Equipment

Note: PDF file will open in a new window.

List last updated August 2016

EPCP Facilities

  • 67,500 Sq. Ft. Manufacturing and Warehouse Facility

Wax Injection Equipment

  • 6 MPI 20 Ton Paste Wax Injection Machines
  • 2 MPI 20 Ton Paste Wax Injection Machines
  • 2 MPI 25 Ton Paste Wax Injection Machine
  • MPI 50 Ton Paste Wax Injection Machine
  • MPI 12 Ton Automatic Wax Injection Machine
  • Chiller

Dip & Molding Equipment

  • 2 Romco Fluidized Beds
  • 5 Ceramic Dip Tank Systems
  • 2 Rainfall Sanders
  • Climate Controlled Ceramic Drying Room
  • 2 Pneumatic Mold Manipulators
  • Fanuc Robot & Mold Conveyor System
  • 2 48 x 60 Autoclave Units

Melting & Pouring Equipment

  • Pillar Mark VIII, 250 KW, 500 lb. & 1,000 lb. Induction Furnace
  • Pillar Mark VIII, 250 KW Power Unit with 300 lb., 500 lb.,
    & 1000 lb. Furnaces
  • Pillar Mark VIII, 300 KW, 500 lb. & 1000 lb. Induction Furnaces
  • 7 Ceramic Mold Preheat Ovens

Cleaning & Finishing Equipment

  • Herschal Knockout Hammer
  • 2 Ramco Ceramic Leach Tanks
  • Pressure Blast Cabinet
  • 2 Ruemelin Sand Blast Cabinets
  • 2 Goff Tumbleblast – 6 Cubic Foot
  • Wheelabrator Tumbleblast – 3 Cubic Foot
  • Goff Tumbleblast – 1 Cubic Foot
  • Ener-Pac 5 Ton Press
  • Dake – 25 Ton Press
  • 2 Double End Belt Grinders
  • Techmatic Rise & Fall Grinder
  • AW Bell Belt Grinder
  • AW Bell Saw
  • Hot Pressing Oven

Quality Control & Testing Equipment

  • Willson 3JR Rockwell Hardness Tester
  • Detroit Testing Machine PH-1 Brinell Hardness tester and Newage Brinell Scope
  • Full ceramic testing laboratory
  • Continuous temperature and humidity recording of shellroom and drying room environment
  • Continuous temperature recording of mold burn-out/pre-heat oven temperatures
  • Pantak HF320 X-Ray System capable of foundry-control radiographic testing of up to 2” thick steel
  • 2 Leco GDS-500A Spectrometers capable of analyzing ferrous and non-ferrous alloys
  • Assorted measurement equipment for dimensional inspection including pin gages, calipers, surface plates, and custom-designed gages
  • Brown & Sharpe CMM with PC-DMIS
  • Creaform ExaScan 3-D scanner with GeoMagic Inspection
  • One seat of Solidworks 3-D modeling software
  • One seat of MagmaSoft Casting Simulation Software